| Specifications: |
| Model |
RCN-400 |
| Hardware Specifications |
|
| Power supply |
230 V A.C nominal (160V to 240V) / -48 V D.C nominal (-36V to -60V) |
| Dimensions |
Single Slot (S. S.) Enclosure : 255 x 170 x 62 mm & 19” shelf : 586 x 355 x 435 mm |
| Operating environment |
-15 ~55 degree C, 5%~90%RH |
| Interfaces |
|
| WAN E1 |
120 Ohms /75 ohms network interface |
| Standards |
Complies with G.703, G.704, G.706 & G.732 |
| Modes |
Structured / Unstructured modes |
| Line Code |
HDB3 |
| |
LIU Sensitivity: (I) Short Haul.0 to -6dB (II) Long Haul.0 to –34dB (III) Ext. Long Haul. -20 to –48dB |
| Clock Options |
Internal Clock/ External Clock/ G.703 Recovered Clock |
| User E1 |
120 Ohms /75 ohms network interface |
| Standards |
Complies with G.703, G.704, G.706 & G.732 |
| Modes |
Structured |
| Line Code |
HDB3 |
| |
LIU Sensitivity: (I) Short Haul.0 to -6dB (II) Long Haul.0 to –34dB (III) Ext. Long Haul. -20 to –48dB |
| Clock Options |
Internal Clock |
Synchronous Interface V.35/V.36/X.21/RS530 |
Standard M34 pin Connector |
| Data Rate |
Client interface providing up to 2.048 Mb/sec data |
| Nx64 |
N x 64 Kbps (N=1 to 32) user configurable as bandwidth requirements |
| |
DTE, DCE soft configurable (Optional) |
| Ethernet |
Compliance to Ethernet & IEEE 802.3 standards |
| Protocol |
Supports standard HDLC protocol |
| |
10 Base-T (RJ-45), IEEE 802.3, half & full duplex |
| MAC address |
Dynamically learning and aging up-to 2048 MAC addresses |
| Management |
|
| Front panel LEDs |
Power supply Indication. E1: E1 Faults (LOS, AIS or Loss of frame), Synchronous Interface: Transmit Data (TD) & Receive Data (RD). Ethernet: Link Up LED. Test & System Fault |
LCD with front panel switches
|
For System Information, Configuration & Fault Diagnostics |
| Loop backs |
Network-to-Network loop back at G.703 Interface & Client-to-Client loop back at Data Interface |
| BER Meter |
Yes with PRBS generator |
| Console |
RS232 connector for PC connectivity |
