RCN-500;Ethernet to 4/8E1,SNMP supported

	Maximum 8 E1 interfaces, ITU-T G.703/704/823 compatible
	Inverse-multiplexing of up to 8 interleaved E1 channels
	RCN 500 supports Ethernet over PDH ( EoPDH) standards
	MAC frames are encapsulated in HDLC frames
	Automatic link capacity adjustment according to the availability of the E1 links
	120 Ohm/75 Ohm interface on the E1 side
	Automatic LAN addresses table learning and aging
	End to end management using SNMP V1/V2
	Capability to reset the remote system
	Local loop-back & Remote loop back function of E1 circuits
	Ethernet support AUTO-MDIX in UTP mode
	Option is available for 10/100Base-T or 100Base-FX interface for Ethernet
	230V AC or -48V DC Power supply option available
	Front panel visual indication for Loss of Signal, Remote Alarm, FCS Error, Loss of Frame and CRC error in E1 channels, and Link/Act, Duplex, Speed and collision indication for Ethernet port

Ordering Information

RTS RCN-500T/FX-2E1:10/100 Base-T/FX Ethernet to 2 E1
RTS RCN-500T/FX-4E1:10/100 Base-T/FX Ethernet to 4 E1
RTS RCN-500T/FX-8E1:10/100 Base-T/FX Ethernet to 8 E1
RTS RCN-500-SNMP: SNMP Manager card for the 12 slot 19” shelf
RTS RCN-500T/FX-4E1-C:10/100 Base-T/FX Ethernet to 4 E1 card for shelf mounting
RTS RCN-500T/FX-8E1-C:10/100 Base-T/FX Ethernet to 8 E1 card for shelf mounting

*RealTime Systems Ltd reserves the right to change the specifications without prior notice.