 |
SNMP Agent embedded in the unit reads the information from the Un-interrupted
power supply converts it into SNMP protocol and sends it to Network Management
Servers |
|
Generate traps for Network Management Servers on occurrence of Alarms from the
Un-interrupted power supply |
|
Configures Input/Output settings for Un-interrupted power supply on demand. |
|
Provides support for generic RFC-1215, supports SNTP v4 (RFC-2030) & NTP |
|
Unit can be configured through TELNET or can be remotely configured using NMS
Manager |
|
Two outputs are provided through potential free relays which can be used for specific
requirements of the user like starting of the generator set etc. |
|
RAMS-100 specific MIB file is provided for the interpretation of the SNMP messages. |
|
IEEE 802.3, 10/100 Base-T interface is provided to connect the unit to LAN/Internet
cloud |
|
RJ45 connector is provided for connecting the unit to the Un-interrupted power supply. |
|
Separate Dip Switch is provided for hardware settings of NO/NC condition for
Input/Output |
|
Input power supply 25V to 60V DC |
