Rating |
10 KVA |
Model |
RPOI 100S |
Series |
RPOI Series |
Technology |
PWM IGBT with Microprocessor control |
Input |
Voltage Range |
160-300 VAC |
Phase |
Single |
Power Factor |
>0.98 |
Output |
Voltage Regulation |
230Vac +/- 1% |
Frequency |
50 Hz +/- 0.1% (On Battery) |
Waveform |
Pure Sine Wave |
Total Harmonic Distortion |
<3 % with Linear Load ; < 5% on Computer Load |
Power Factor |
0.8 |
Crest Factor |
> 3:1 |
Over load Capacity |
>120% for 1 Min., >150% for 1 Sec |
Efficiency |
Overall efficiency >85% , Inverter Efficiency >92% |
Battery |
DC Voltage |
192 VDC |
Type |
Sealed Maintenance Free Lead Acid |
90% Recharge Time |
3 to 4 hours |
Capacity (AH) |
7AH X 16 No of Batteries |
Maximum Charging Current |
1.5A |
Display |
LED |
Mains, Inverter, Bypass, Battery status, Fault status, Load status |
Environmental Parameters |
Operating Temperature |
0-45 Deg C |
Relative Humidity |
0-95% (Non-Condensing) |
Acoustic Noise Level |
< 45 dB (1 Meter) |
User Interface |
Communication Port |
RS 232 or DB9 |
SNMP adaptor |
Optional |
Operating System |
Window 98/NT/2000/Me/XP/2003/Novell NetWare |
Physical |
Dimensions WXDXH (In mm) |
310X675X849 |
Weight |
112 |
Protections |
Overload, Short Circuit, Noise Control, Battery Low/High, Output abnormality,
Modem Interface |
Alarms |
Mains Failure, Battery Low, overload, UPS Fault |
